PS-4800
Fashion front panel is made of brushed aluminums alloy.
Sturdy steel case can shield the electromagnetic interference from outside.
Strong multi-protection mechanism including radiating protection, short circuit protection and switch delay protection.
4 channels output and 800w rated power of per channel
Design of optimized switching power supply makes the amplifier smaller and easy to be installed.
High quality connectors guarantee perfectly signal transmission by firming conjunction.
Suitable for large stages, pubs, KTV rooms and large conference rooms etc.
8Ω stereo(1kHz(EIA)with 0.5%THD):800W x 4
4Ω stereo(1kHz(EIA)with 0.5%THD):1100W x 4
Voltage Gain:38.3dB
Total Harmonic Distortion(THD):< 0.5%,20Hz-20KHz
Intermodulation Distortion(IMD):≦0.35%
Slew Rate:>10V/us
Frequency Response (at 1 Watt):20Hz-20KHz,+0/-1dB
Damping Factor (8 Ω),10Hz-400Hz:>200
Signal-to-Noise Ratio:>100dB
(below rated power,20Hz -20kHz,A-weighted )
Crosstalk (below rated power) At 1 kHz At 20 kHz:-75dB -59dB
Input Sensitivity for full rated power at 8Ω:0.775V or 1.4V
Input Impedance (nominal):Balanced :20kΩ/Unbalanced:10kΩ
Output Circuitry: Class H
Input Connectors: Once balanced XLR per channel
Output Connectors(Speaker Connectors):4-POLE Speakon per channel
Front Panel Controls :Power on/off switch, one gain control per channel
Rear Panel Controls: Power on/off switch ,one gain control per channel
Input sensitivity switch:0.775V or 1.4V
Power Indicator ,Signal Indicator: One red LED of work ,One green LED per channel
Clip(peak) Indicator, Fault Indicator: One yellow LED per channel ,One red LED per channel
Protection: Protection against short circuits, no-load,on/off muting,
Rf interference. Stable into reactive or mismatched loads
Ventilation: Flow-through ventilation form front to back
Cooling: speed regulated ,thermal protection
AC Power: AC220V/50Hz ±10%
